ELMONAS / TRADE INSIGHTS · PRICING GUIDE
How parcel pricing works for melee
The short answer
A melee parcel is priced against its written specification, not from a published rate card; the drivers are the size band and its tolerance, the colour and clarity basis, the make, the matching effort, the disclosure and screening scope, and the parcel's actual scale weight rather than an estimated piece count.
What this means for a buyer: Compare parcels line by line on specification, and treat piece counts as estimates until the parcel is weighed.
Key takeaways
- The size band and its tolerance define the parcel before anything else is discussed.
- Colour and clarity are quoted as a basis and a range, and matching effort is a separate cost driver from the grades themselves.
- Parcel-level screening and individual laboratory reports are different services with different scopes.
- Scale weight is a measurement; a piece count is an estimate. Quotes should say which one they use.
Size band, dimensions and actual weight
Every parcel quote starts with the size band: the sieve or millimetre range the stones must fall inside, and the tolerance applied at the edges. A tighter band costs more to assemble because more goods are rejected during sieving and gauge checks. The parcel is then weighed on a scale, and that scale weight is the quantity the transaction settles on. Order by millimetre size and quantity, not by a sieve number alone, because sieve numbering is not standardised across the trade; the melee size chart shows how diameter maps to approximate weight for planning.
Colour, clarity, cut and matching effort
Colour and clarity enter a parcel quote as a stated basis: the range the parcel is assembled to and the reference point used to judge it. Two parcels both described as one colour band can differ visibly if one was assembled tightly and the other loosely, which is why matching effort is its own driver. A parcel matched for a single layout, where every stone must read the same face up, takes more labour than a parcel matched to a general band. Make matters the same way: consistent cut across hundreds of small stones is what keeps a pave line even, and it is inspected as part of the parcel, not assumed from the band description.
Material disclosure, screening and report scope
A lab-grown parcel quote should state the material disclosure plainly: laboratory-grown diamond, with the growth-method disclosure the buyer asks for. Screening is parcel-level work: representative verification that the goods are diamond and lab-grown, done to an agreed scope. Individual laboratory reports are a different service with a per-stone scope and are unusual at melee sizes. Mixing the two scopes in one line of a quote is how comparisons go wrong, so a clear quote names which one it includes.
Piece counts versus scale weight
A piece count is derived from the average weight per stone for the size, so it is an estimate with a tolerance of its own. Scale weight is measured. Two quotes for the same parcel can look different purely because one prices by estimated count and the other by weighed carats; the comparison only works once both are expressed the same way. Ask which basis a quote uses before comparing totals.
Receiving check and like-for-like comparison
On arrival, the receiving check mirrors the specification: weigh the parcel, spot-check the size band with a gauge, review colour and make against the agreed basis, and reconcile the paperwork. Like-for-like comparison then comes down to reading two quotes line by line: same band and tolerance, same colour and clarity basis, same matching scope, same disclosure and screening scope, same weight basis. Anything unspecified in a quote is a place where the cheaper number may simply be a narrower promise.
Supply within a narrow specification can be thin, which is part of why parcels are assembled and quoted per order. In the historical statistics index draft, 64 of 128 D-to-F specification lines hold fewer than 20 stones (50.00%); the index is a dated file sample of certified goods, not melee stock, and it is cited here only as evidence that tight specification lines were thin in that sample. Availability is stated as available to order, confirmed in your quotation.
Questions
Why is there no published price list for melee parcels?
Because the price follows the specification: size band and tolerance, colour and clarity basis, make, matching effort, disclosure scope and weight basis all move it. A number without those lines is not comparable to any other number.
Is a piece count or a scale weight better for buying?
Scale weight is the measured quantity and the safer basis to settle on. Piece counts are planning estimates derived from average stone weight and should be labelled as such in a quote.
Do melee stones come with individual grading reports?
Usually not. Parcel-level screening to an agreed scope is the norm at these sizes; individual laboratory reports are a separate, per-stone service and should be quoted as one when requested.
Sources
- Parcel pricing mechanics and quotation practice: Elmonas workshop practice, documented and reviewed 12 November 2026.
- Specification-depth figures: Elmonas Surat Stock Index draft, a dated file sample of 12 October and 11 November 2026, linked at the anchor above.
Last reviewed: 12 November 2026
Discuss your requirement with Elmonas. We reply on WhatsApp during Surat business hours (IST).